Tripp Lite B127A-1A1-BDFH AV extender AV transmitter & receiver Black, White

In stock
SKU
B127A-1A1-BDFH
Tripp Lite
$178.60
Quick Overview
  • Supports 4K @ 60 Hz video resolutions (4:4:4) as specified in HDMI 2.0
  • Power over Cable (PoC) technology provides power to the receiver via Cat6 cable
  • Transmitter’s local port shows you the 4K image being displayed at the other end
  • Stretches 230 ft. signal to 400 ft. with addition of optional B127A-010-H repeater
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Cat6 Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The metal transmitter box and the single-gang metal wall plate receiver with metal back cover blend perfectly into the room décor.

Extends a 4K A/V Transmission up to 230 ft....or Even Farther
The B127A-1A1-BDFH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding a B127A-010-H HDMI repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters).

Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color
The B127A-1A1-BDFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified in HDMI 2.0, with 7.1-channel surround sound. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.

Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
After you connect the included external power supply to the transmitter, Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to install the receiver where best needed without worrying about finding a nearby AC outlet.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as P580-Series). Then, connect the receiver to the display with a user-supplied HDMI cable (such as P569-XXX-CERT or P568-XXX-2A). Finally, connect the two units with user-supplied Cat6 patch cable (such as N202-Series). Mounting hardware is included for both units.

TAA-Compliant for GSA Schedule Purchases
The B127A-1A1-BDFH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
0
Rating:
0% of 100
Write Your Own Review
You're reviewing:Tripp Lite B127A-1A1-BDFH AV extender AV transmitter & receiver Black, White
Your Rating

Features

TypeAV transmitter & receiver
Maximum resolution3840 x 2160 pixels
Cable types supportedCat5, Cat5e, Cat6, HDMI
Maximum transfer distance70.1 m
Audio systemMultichannel
Extended display identification data (EDID)Yes
Audio output channels7.1 channels
LED indicatorsYes
Supported video modes720p, 1080p, 2160p
Supported graphics resolutions1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 3840 x 2160
Cable length1.38 m
HDCPYes
MaterialMetal
Colour depth36 bit
3DYes
Rack mountingYes
Consumer Electronics Control (CEC) supportYes
Wall mountableYes
HDCP version1.4/2.2
Product colourBlack, White

Ports & interfaces

Connectivity technologyWired
Ethernet LANYes
RJ-45 input ports1
RJ-45 output ports1
HDMI in1
Number of HDMI outputs1
HDMI version2.0
DisplayPorts in1
DC-in jackYes

Power

AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Operating voltage24 V
Input current0.6 A
Output current1 A

Operational conditions

Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-15 - 50 °C
Operating relative humidity (H-H)0 - 85%
Storage relative humidity (H-H)0 - 85%

Weight & dimensions

Receiver dimensions (WxDxH)70 x 33.8 x 115 mm
Receiver weight650 g
Transmitter dimensions (WxDxH)115 x 62.4 x 27 mm
Transmitter weight650 g

Packaging data

Package width352 mm
Package depth164.1 mm
Package height55.1 mm
Package weight1.03 kg
Package typeBox

Packaging content

AC adapter includedYes
Included power plug typesAU, EU, NA, UK
ManualYes
Mounting kitYes

Technical details

Country of originTaiwan
Sustainability complianceYes
Sustainability certificatesCE, REACH, RoHS

Logistics data

Master (outer) case width586 mm
Master (outer) case length374.9 mm
Master (outer) case height197.1 mm
Master (outer) case gross weight11.1 kg
Products per master (outer) case10 pc(s)
Master (outer) case GTIN (EAN/UPC)10037332263992