Tripp Lite B127A-110-BH AV extender AV repeater
Quick Overview
- Combines with B127A-111-BHTH to extend 4K signals up to 230 ft.
- Supports UHD resolutions up to 4K @ 60 Hz (4:4:4) for crystal-clear video
- Carries High Dynamic Range (HDR) signals for rich contrast and expanded color accuracy
- Power over Cable (PoC) technology provides power to the receiver via Cat6 cable
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
HDMI Extender Transceiver Unit Ideal for Digital Signage in Schools and RestaurantsThis 4K IR transceiver is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.Combines with HDMI Extender Kit to Add More DistanceThe B127A-110-BH works with B127A-111-BHTH extender kit (sold separately) to further extend a 4K audio/video signal up to 230 feet. It connects between the transmitter and transceiver from the extender kit with user-supplied Cat6 cabling. IR remote control lets you operate the source from the display end of the installation.Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 ColorThe B127A-110-BH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This transceiver also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.Create a Daisy Chain to Achieve More DistanceThis transceiver combines with the B127A-111-BHTH extender kit (sold separately) and additional B127A-110-BH transceivers to form daisy-chain installations up to 920 feet from the transmitter. Up to four total transceivers can be chained together, each capable of extending a 4K/60 Hz signal up to 230 feet per unit. In addition to the extender kit, this transceiver is also compatible with B127A-1A1-BCBH, B127A-1A1-BDBH and B127A-1A1-BHBH and can be used to replace any receivers in the installation as well.Add a Signal Booster to Achieve, Yes, Even More DistanceThe transceiver is also compatible with B127A-010-H signal booster (sold separately), which allows the signal to be boosted up to 400 feet total between the transmitter and transceiver. When used in a daisy-chain installation, this brings the total extension distance up to 1,090 ft. Note: B127A-010-H will only work when used in the first link of the daisy-chain installation.Built-In PoC Technology Lets You Avoid Bulky External Power BricksPower over Cable (PoC) technology powers the receiver at the end of the chain over Cat6 cable. LEDs on both the transmitter and transceiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the transceiver where needed without worrying about finding a nearby AC outlet. Power is also equally distributed to any additional transceivers within a daisy-chain installation.Plug-and-Play Operation for Quick Setup and Immediate UseThe transceiver works right out of the box with no software required. Mounting hardware is included for installing it on a wall, pole or 19-inch rack. Connect the transceiver to a transmitter and any additional transceiver with user-supplied Cat6 patch cable (such as N202-Series). Connect to a 4K display with a user-supplied HDMI cable (such as P568- or P569-Series).TAA-Compliant for GSA Schedule PurchasesThe B127A-110-BH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Write Your Own Review
Features
Type | AV repeater |
Maximum resolution | 3840 x 2160 pixels |
Cable types supported | Cat5, Cat5e, Cat6, HDMI |
Maximum transfer distance | 70.1 m |
Maximum refresh rate | 60 Hz |
Audio system | Multichannel |
Extended display identification data (EDID) | Yes |
Audio output channels | 7.1 channels |
LED indicators | Yes |
Cable length | 1.38 m |
Material | Metal |
Colour depth | 36 bit |
3D | Yes |
Consumer Electronics Control (CEC) support | Yes |
Wall mountable | Yes |
Ports & interfaces
Connectivity technology | Wired |
RJ-45 input ports | 1 |
RJ-45 output ports | 1 |
Number of HDMI outputs | 1 |
Digital audio optical out | 1 |
Remote (IR) input | 1 |
Remote (IR) output | 1 |
DC-in jack | Yes |
Power
AC input voltage | 100 - 240 V |
AC input frequency | 50-60 Hz |
Operating voltage | 24 V |
Input current | 0.6 A |
Output current | 1 A |
Operational conditions
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -15 - 50 °C |
Operating relative humidity (H-H) | 0 - 85% |
Weight & dimensions
Width | 115 mm |
Depth | 62.4 mm |
Height | 27 mm |
Packaging data
Package width | 260.1 mm |
Package depth | 164.1 mm |
Package height | 55.1 mm |
Package weight | 660 g |
Packaging content
AC adapter included | Yes |
Included power plug types | AU, EU, NA, UK |
Manual | Yes |
Mounting kit | Yes |
Technical details
Country of origin | Taiwan |
Sustainability compliance | Yes |
Sustainability certificates | CE, REACH, RoHS |
Logistics data
Master (outer) case width | 573 mm |
Master (outer) case length | 273 mm |
Master (outer) case height | 175 mm |
Master (outer) case gross weight | 6.9 kg |
Products per master (outer) case | 10 pc(s) |
Master (outer) case GTIN (EAN/UPC) | 10037332258608 |
Validate your login